Amphora 2026.10 Version Guide
Version 2026.10 is delivered as a series of incremental releases. Each release's changes are listed separately below, newest first.
- Version 2026.10.1088 — new support chat, new recycle bin, new DHX module, series documents in the new self-service portal (coming soon), a person as a document relation, a process for a person group, protection against reverting to an earlier version, and fixes to forwardings, signing, templates and the self-service portal
Version 2026.10.1088
New features
-
New support chat. You can now chat with customer support in Amphora's own chat window, which opens from the Chat with support button in the lower left corner of the screen; the old chat link in the lower right corner is no longer used. Customer support sees at once who you are and which organisation you are from. When customer support is not answering (we answer on working days from 8:00 to 18:00), leave a message or write to help@amphora.ee. See Support chat.
-
New recycle bin. The recycle bin has a new design: you can search entries by title, browse them by type, folder and deletion date, and restore or permanently delete several entries at once. After a restore, a message appears where the restore of a document, letter, case, series, organisation or person can be cancelled at once with the Undo button. An entry that is still used elsewhere is not permanently deleted; the reason is shown instead. The Old view button takes you back to the old view.
-
Series documents in the new self-service portal (coming soon). The series settings have a new option Show documents in the self-service portal, meant for the new self-service portal: there, the employees of the series' unit and its sub-units see the documents of the marked series, read only. The new self-service portal is coming soon; in the current portal the option does not change anything yet, but series can already be marked.
-
A person as a document relation. A person from the Persons module can now be added as a relation of a document. The relation is shown in the Relations panel of both the document and the person.
-
A process for a person group. The participant choice of a document process has a new option Person groups (Self-service); a person group is created in the Persons → Groups view. When a group is chosen, every member of the group gets their own task in the self-service portal; members without a personal ID code or e-mail address are left out, and their names are shown.
-
Protection against reverting to an earlier version. A document cannot be reverted to an earlier version while a process on the document is in progress. The valid version cannot be deleted while a signing task is not finished, and a signed version cannot be deleted. In these cases, a message explains why.
-
Plain language hint in the form editor. When the texts of a form meant for citizens contain words used only inside the organisation, the form editor suggests simpler words on save. The hint is for information only and does not prevent saving: when you press Save again, the form is saved as it is.
-
More rows per page in reports. Report results can show 50, 100, 200 or 500 rows per page, 100 by default. The paging bar is both above and below the list.
-
Task search in the self-service portal. The task tabs of the current self-service portal have a search box that searches by title, sender and task text. Long task lists open faster.
-
New DHX module. The DHX module has a new design, which is in use in this version. If you want, the Old view button takes you back to the old view, and the New view button returns you to the new one.
-
Incoming and outgoing letters. The view has the tabs Incoming, Outgoing and Address book, and a search by title, sender or recipient; when several organisations receive letters, there is also an organisation choice. The tabs show how many letters are waiting to be registered and how many need attention. An open letter shows the reply deadline.
-
New letters. Letters that have arrived since you last opened the DHX module are marked New in the list, and their title is in bold. The marks disappear the next time you open the DHX module, whether or not the letter was opened. The time of the last opening is kept in the browser, so another computer or browser has its own marks.
-
Registering a letter. To register a received DHX document, open it: the registration buttons are in the document view; before, a letter could be registered straight from the list. A letter can be registered with the Register as a letter button, the Register as an invoice button (the e-invoice data is read from the letter) or by a registration profile. The choice opens a prefilled registration form, where the letter is saved. When another user is registering the letter, the list shows it.
-
Sending report for outgoing letters. Each outgoing letter shows whether the letter reached every recipient. When a letter did not reach a recipient, a message explains the reason in plain language and suggests what to do; the letter can be sent again with the Send again button.
-
Address book. The Find the missing organizations button shows the organisations in the DHX address book that are not yet in the Organisations module, and an administrator can add them there one at a time. Nothing is sent to anyone.
-
Deleting a letter. A letter is deleted from the DHX module permanently; when the letter has already been registered, the registered document or letter stays.
-
-
AmBot (coming soon). The top menu bar gets the Amphora assistant AmBot, which opens a chat panel next to the page. AmBot is coming soon and is switched on for each organisation separately; see AmBot.
Fixes
-
Forwardings. Before, in some cases a file in a signature container was also sent separately with the e-mail, and when a new version of the document was made just before sending, the same file could go into the letter twice and the letter became too large to send. Now each file goes out only once, and an unsent forwarding always sends the latest file version of the document. When a letter is too large, the message now shows the size of the attachments and the allowed limit; before, it only said that the message was too large and added a technical code.
-
Resending a failed forwarding. Before, an e-mail that the e-mail service rejected stayed in the failed state, and the Send button did not send it again, because Amphora wrongly took the letter as sent. Now such a forwarding can be sent again. This applies to letters whose sending fails after the update.
-
Signing. Before, a new version of some signed documents could not be saved: saving ended with an error, because Amphora looked for a version of the signature container that had already been deleted. Now the last valid version of the container is always used.
-
Cases. Before, depending on the form, a case could be saved without a title or a folder. Now the title and the folder are checked on save, and when one of them is missing, the case is not saved.
-
Recycle bin. Before, the recycle bin also permanently deleted a person or organisation that other entries still referred to (for example, a document party, a department or a forwarding); now such a person or organisation is not permanently deleted. Before, the search did not find, for example, series and files, because they were searched by another name than the one shown in the list. Now the search uses the same title that the list shows.
-
Meetings and polls. Before, the right to delete or change a meeting and to write its minutes was checked only by hiding buttons, so in some situations these actions could be done without the right; now the right is checked at every action. A poll could before be answered several times and also after the deadline, and changing the poll could delete answers already given. Now a poll can be answered once and before the deadline (otherwise a clear message is shown), and the answers stay when the poll is changed.
-
Calendar. Before, the calendar search by title, description or search phrase did not find the user's own events marked private. Now it does; the search does not show other users' private events.
-
Users. The Log in as this user function is meant only for main users (or a user who has been given the user group right for it). Before, a main user was logged out when this function failed and had to log in again. Now they stay logged in with their own account and see the message “Logging in as this user failed. You continue with the account you had.”
-
Archive schema. Before, a folder could not be saved in the Archive → Archive schema view with the Create folder and Edit buttons. No choice fitted the authority type field: the form only showed a red asterisk with no explanation, and nothing was saved. Now an archive schema folder can be created and changed, and the chosen authority type is saved.
-
E-mails. Before, the Download button on the lower toolbar of the e-mail view did nothing; only the upper button worked. Now both work.
-
Search. Before, a search phrase longer than 198 characters gave an error in the top search, also called global search (and in module searches), and nothing was searched. Now you can search with a long phrase too.
-
Filling templates. In a document created from a template, some template fields were left empty or printed wrongly before. The following cases are fixed:
-
Header and footer. When a ::tag:: was only in the header or footer of the document, it was left unfilled, and the document kept, for example, the text
::Pealkiri::. When a value contained the character&,<or a quotation mark, the header or footer showed, for example,&instead. Now the header and footer are filled in the same way as the body of the document. -
Line breaks. The value of a multi-line field was printed on one line, because a line break turned into a space or disappeared. Now the lines are kept both in ::tags:: and in Word quick part fields.
-
Number fields. A number was printed with a long row of zeros (for example 42,00000000000000000000), and an empty number field was printed as
-
Now a number is printed without extra zeros (42), and an empty field stays empty.
-
Choice fields. The chosen values of multi-choice drop-down, editable drop-down and classifier fields were not printed before; now the names of the choices are printed, separated by commas. When a choice had no name in the user's language, its number was printed before instead of the name; now the name is printed in the user's language or in Estonian.
-
Word quick part fields. For date and time, deadline, and list and choice fields, Word showed the message “No document variable supplied” in the filled document before. Now these fields are filled too.
-
-
Self-service portal. Before, the Download and Preview buttons were sometimes missing next to the files of a signature container when the name of the file in the container differed from the saved name; now the container files and the PDF preview always open. When the organisation had no process for an application, the application was registered before and the citizen was told that it had been sent, although no process started. Now such an application stays a draft, and the citizen gets a message about it.
-
Organisations. Before, a department could not be saved without a registry code: the edit form set Estonia as the department's country and asked for a code even when nothing was changed. Now a department is not asked for a registry code.
-
Interfaces. From 7 October, SPOKU sent documents in a new form that had a field without a type, and Amphora gave a technical error when receiving them. Now such a document is rejected with a clear error message that names the faulty field.
Other improvements
-
E-mail connection security. Amphora now reads and sends the mail of e-mail accounts only over an encrypted connection. When the organisation's mail server does not support an encrypted connection, an administrator can tick Allow unencrypted mail when the mail server offers no STARTTLS in the organisation settings. When an account's password can no longer be read, the account shows the message The password must be re-entered.
-
Passwords and keys in settings. Saved passwords and keys are no longer shown in the settings. The field shows Saved. Leave empty to keep it. The value can be removed with the Remove the stored value check box.
-
Security. Public view searches, the user list, DHX lists and self-service portal files have been reviewed and are better protected. This is a technical change that does not directly change users' daily work.
-
Internal technical fixes and improvements have been made.
Last modified: 05 November 2026, 07:30:04